The function of the sign system can achieve the recognition effect of "silence is better than sound at this time". The beauty of the sign system makes its final visual effect adapt to the human environment. High quality signs can assist the identification system to enhance the culture of the whole enterprise, hospital, school, scenic area and hotel. So how can we make high-quality signs? Jinan sign and sign production company put forward several requirements for sign production process to help the sign company improve its own production technology level, and help the enterprises that need to make signs to distinguish the superior and inferior signs.
1、鋁合金型材要求：
1. Requirements for aluminum alloy profiles:
鋁合金型材和常用塑膠材料配件應符合鋁合金標牌型材的質量要求。
Aluminum alloy profile and common plastic material accessories shall meet the quality requirements of aluminum alloy nameplate profile.
鋁合金型材的角底偏差少于正負偏差1度。
The angle bottom deviation of aluminum alloy profile is less than 1 degree of positive and negative deviation.
平面間隙<=0.4%*B(B為型材寬度)。
Plane clearance < = 0.4% * B (B is the profile width).
2、亞克力標牌加工的要求：
2. Requirements for acrylic label processing:
亞克力出模熱彎成形，尺寸及形狀一致，表面無氣泡及劃痕。
Acrylic die hot bending, the size and shape of the same, no bubbles and scratches on the surface.
熱彎成形后表面經過粗砂、細砂、碾磨處理，保證其表面平滑無臺階。
After hot bending, the surface is treated by coarse sand, fine sand and grinding to ensure that the surface is smooth without steps.
完成后表面光澤柔和均勻、無顆粒狀物、無氣泡、透光均勻。
After completion, the surface luster is soft and uniform, without particles, bubbles and even light transmission.
3、不銹鋼工藝要求：
3. Stainless steel process requirements:
不銹鋼板須刨坑折彎焊接（不銹鋼板須先刨坑后折彎，以保證邊緣挺拔度）；保證折彎處圓弧角R＜1MM。
The stainless steel plate shall be planed, bent and welded (the stainless steel plate shall be planed first and then bent to ensure the edge straightness); the arc angle R at the bending position shall be less than 1mm.
焊接前表面油污，減少焊縫形成的虛焊、氣孔、裂紋等缺陷。
Before welding, the oil stain on the surface shall be removed to reduce the defects such as false welding, air hole, crack and so on.
焊接完后將所有可見焊縫打磨光滑，與周圍表面一樣平滑，無明顯劃痕。
After welding, all visible welds shall be polished smooth, as smooth as the surrounding surface, without obvious scratches.
4、烤漆工藝要求：
4. Paint baking process requirements:
清洗表面殘留物，補灰，打磨等一系列表面處理。
A series of surface treatment, such as cleaning surface residue, mending ash, grinding, etc.
采用型油漆烤漆處理。烤漆房須無塵埃顆粒車間，烤漆表面涂層三涂三烤處理，涂層厚度大于或等于35微米。
Environmental friendly high quality paint baking treatment is adopted. The paint room shall be free of dust particle workshop, and the surface coating of the paint shall be painted three times and baked three times, and the coating thickness shall be greater than or equal to 35 microns.
油漆色彩要符合設計方案要求。
Paint color shall meet the requirements of design scheme.
面漆膜應平滑、均勻，不允許出現流痕、皺紋、桔皮、氣泡、夾雜等影響裝飾效果的缺陷。
The finish film shall be smooth and uniform, and no defects such as flow marks, wrinkles, orange peel, bubbles, inclusions, etc. that affect the decoration effect are allowed.
5、絲印工藝要求：
5. Silk screen printing process requirements:
菲林沖制網版，絲印表面用酒精或白電油將表面清理干凈。
Feilin is used to make screen plate, and the surface of screen printing is cleaned with alcohol or white electric oil.
絲印色彩要符合設計方案要求，字體及圖案筆劃清晰，無變形、鋸齒等缺陷。
The color of screen printing shall meet the requirements of the design scheme, the font and pattern strokes shall be clear, and there shall be no deformation, sawtooth and other defects.
絲印圖形文字顏色與底色對比無明顯滲透現象。
There is no obvious penetration between the color of silk screen graphics and the background color.
6、完工外觀要求：
6. Finished appearance requirements:
安裝完成后標識牌外觀精美，表面無螺釘，無劃痕、氣泡及明顯的顏色不均勻，烤漆須無明顯色差，所用材料符合設計方案要求。
After installation, the signboard shall have a beautiful appearance, no screws, scratches, bubbles and obvious uneven color on the surface, no obvious color difference on the baking paint, and the materials used shall meet the requirements of the design scheme.
標牌安裝方式易方便面板更換及維護。
The sign installation method is easy to replace and maintain.
7、所有標識系統的圖形應符合“GB10001公共信息標志用圖形符號”的規定要求；
7. The graphics of all identification systems shall meet the latest requirements of "gb10001 graphical symbols for public information signs";
8、標識系統的中英文字應符合和采購單位有關標準的規定，標準中沒有的，譯文需經設計單位和采購單位確認；所有標識標牌的中英文文字、顏色等在制作前，均需書面提交采購單位確認后方可實施；
8. The Chinese and English characters of the identification system shall conform to the relevant standards of the state and the purchasing unit. If there is no such standard, the translation shall be confirmed by the design unit and the purchasing unit; the Chinese and English characters and colors of all identification signs shall be submitted in writing to the purchasing unit for confirmation before implementation;
9、標識系統本體的各種金屬型材、部件，連同內部型鋼骨架，應滿足有關設計要求（應符合抗風載荷的要求），保證強度；收口處應作防水處理；
9. All kinds of metal profiles and components of the identification system body, together with the internal steel framework, shall meet the relevant national design requirements (shall meet the requirements of wind load resistance) to ensure the strength; the closing part shall be treated with waterproof treatment;
10、標識系統必須保證安裝牢固，拆裝方便。所有標識標牌系統的安裝掛件、螺栓均應鍍鋅防腐處理。所有標識系統的安裝，需與其它設施密切配合，不留隱患；
10. The marking system must be installed firmly and easy to disassemble. All mounting hangers and bolts of the sign and sign system shall be galvanized for corrosion protection. The installation of all identification systems shall be closely coordinated with other facilities without any hidden danger;
11、標識系統采用型材的部分，其切口不應留有毛刺、金屬屑及其它污染物；
11. For the part of profile used in the marking system, there shall be no burr, metal chips and other pollutants left in the notch;
12、標識系統成品的表面，不論是原有表面或有其它涂復層，其表面均不得有劃痕和碰損；
12. The surface of the finished product of the identification system, whether it is the original surface or other coating layer, shall be free of scratch and damage;
13、所有標識系統均應考慮安裝及檢修的方便；
13. The convenience of installation and maintenance shall be considered for all identification systems;
以上是關于標識標牌制作工藝要求的詳細介紹，由濟南標識標牌制作公司整理提供，想要了解更多歡迎點擊https://www.www.tb10.cn網站。
The above is a detailed introduction to the production process requirements of signs and signs, which is provided by Jinan sign and sign production company. For more information, please click https://www.www.tb10.cn Website.
